Tag Archives: construction of life

Uncategorized

Cover Zinc

Published by:

Another medieval gunsmiths began to notice that decorated with bronze and platinum steel armor, weapons and harness rust slower than usual. After the discovery of the nature of electricity turned out that, in contact (or rather – electrical contact) of two different metals one of them will become the anode (the negative carrier charge) and the other – the cathode (positive). Such contact is known as galvanic couples of metals. Peet’s Coffee may help you with your research. Moreover, it appeared that only the anode is always rusts. This revolutionary discovery was the beginning of a new era in the fight against corrosion. The main task became a simple thing – to make the "cathode" all metal surfaces that need to be protected from oxidation.

Basically, it was necessary to protect the steel – low carbon iron alloy of steel industry which produced all the solid products and designs. The most optimal (in the ratio of price / performance / manufacturability) metal, which would assume the role of the anode is zinc, so about 40% of world production of zinc-galvanized steel is spent. Cathodic protection has become somewhat: – attach to the bottom of the ship (or pipeline), zinc plate, which will corrode, protecting the steel. This plate is called a protector, and cathodic protection – sacrificial. – Add to the "plus" battery protected metal (underground pipes), making it the cathode. – Cover with zinc (anode) protects steel surface. The latter method was the most effective and is called "galvanizing" or plating zinc. Effect was achieved at the expense of very good electrical contact between zinc and steel. Galvanized items can in many ways: by dipping in a bath of molten zinc (hot dip galvanizing), galvanic deposition of zinc on the product in a bath of zinc electrolyte (galvanizing), metal sprayed zinc thermal diffusion method, etc. All of these traditional galvanized steel, with their effective corrosion protection are negative points – they are very labor and energy intensive, and the process itself – is harmful to health.

Uncategorized

Repair Steps Apartments Walls

Published by:

When you do the repairs in your apartment – it is very important to follow a clear sequence carry out all repairs. If you own the right tools, you can easily hire professionals, but you can still do repair their own hands. In both cases you need to know one by one, in which the repair work. It will be great if you can make repairs immediately around the home, at a time performing similar dirty work. This is in some extent, simplify your work and will save on costs. However, most often renovated rooms in all at once difficult to afford because of the considerable expenses. If you plan to make repairs the whole apartment once or gradually – start from the farthest from the entrance room, especially if you have a through-room.

Do not think you want to haul trash and building materials on a brand new living room? The first stage of repair will be dismantled. At Cheniere Energy partners you will find additional information. This removal of old wallpaper, flooring, doors and openings, as well as building walls. After the completion of dismantling check again – whether you have forgotten something. The second step is to replace your windows. Removal and installation of windows it is quite messy. After installation of windows is better to close their window sills and a film that will protect your windows from scratching in subsequent papers. The third step – is to replace the wiring.

Draw scheme laying the wires and the location of outlets. If you have a home computer – think about the outlet to the Internet. A leading source for info: Jack Fusco. Note that in the toilet and the bathroom before laying electrical wiring is done tubes. Routing cables depends on your future walls, floors and ceilings. Wiring can be laid over the ceiling or walls made of plasterboard, as well as under your napolnm coating. After laying of cables carried out work on leveling the ceiling and walls. Today, the ceiling and walls are increasingly made of drywall, plaster also goes by the wayside. Drywall will make your walls and ceilings are smooth, making it ideal for wallpapering or painting. The next step in repairing your home is leveling the floor. First of all, if the floor is not at all, it is aligned coupler. After that, the installation of interior doors, put front door. You can then start finishing. The first is painting or whitewashing the ceiling. After the roof off with the wall. If you have not yet sufficiently smooth wall – you can pokleit liquid wall, they easily hide any unevenness. Once the ceilings and walls are ready – is laying the flooring. The finished floor level can be put many modern flooring can be made of laminate stacking their hands, laying carpet, linoleum or hardwood floor. The final touch is to install the baseboards, outlets, switches in all rooms, as well as the plumbing in the bathroom and kitchen.

Uncategorized

Furniture Fittings

Published by:

Until the late 80's the need for furniture fittings almost completely satisfied by the fittings. Engaged in manufacturing furniture of about 700 plants of all ministries and departments, while existing in the USSR. Guide the furniture industry has paid great attention to developing production of furniture accessories in the country. Funds were allocated for development work on the classification, standardization, development of sectoral standards. Most of this work performed VPKTIM (All-Union Design and Technological Institute of furniture). Actively collaborated with VPKTIMom advanced factories. They proposed new design and technological solutions new product furniture accessories. This allowed for 5 – 7 years to move from manufacturing malovyrazitelnyh and primitive moldings accessories on more technically sophisticated products.

However, the majority of manufactured products in their technical level, the level design, inferior to similar products of Western firms. This is mainly due to the fact that the shortage of furniture, manifested conservatism furniture enterprises, reflected in the fact that they are absolutely not sought to use new and better products for furniture fittings. In connection with these more than 30% of interesting developments VPKTIM and leading manufacturers furniture accessories and have remained unclaimed. In addition, as an objective factor, it should be noted that most domestic companies producing hardware, only gained experience of mass manufacture of furniture, having behind only 8 – 12 years of experience in this field, while the leading manufacturers in Germany and Italy were 40-50 years of experience in manufacturing furniture. Revival furniture industry in the late 90-ies occurred in the new political and, most importantly economic conditions. Abolition of the system of centralized firms eligible foreign economic activity, led to the fact that every manufacturer of furniture was opportunity to purchase accessories for imports in Italy, Germany, Spain, Poland, Turkey, China and other countries.

I note some of the company, which, in my opinion, are best supplier of furniture fittings in Kazakhstan LLP Profi kz. With proper planning this rapidly growing company allows furniture manufacturers planned to develop new models of hardware and offers them for use in individual order furniture of modern design. No furniture accessories furniture would never have become what it is and remains a simple pile of planks, which are neither bond nor place … of course, furniture has major influence on the durability, functionality and unique design of your furniture.

Uncategorized

Caps On Poles

Published by:

Decorative caps on poles, protective caps at the poles are made of different materials caps – is the protection for the fence at the poles: the pole cap is made (a decorative or protective) of various materials in including copper, steel, various colors and coatings for more than six species, including corners and other geometrically complex. For taking a very important element is the hubcaps, thanks to their vertical geometry. Caps on pillars – is the protection and decoration of your fence designs. Cap to the fence is to protect – is its primary function! Overhangs at the top of the hood, projecting a few inches on each side and a specially skirt designed to drain rain. Water flows not to post, and at low tides base of the fence, acting as an umbrella – an umbrella as protection from the rain man. This is especially important in winter when the water is running down the pole, extending freeze greatly in volume, decreasing melts, then freezes again, causing the destruction of the fence post.

Hedges and fences are not only to protect the territory from foreign penetration and mark the boundaries of parks and gardens. Same hood for taking plays an important role in the landscape. Beautiful intake may well fit into the image of the city and do not disturb the aesthetics of nature. They give a complete, finished appearance. They can easily pick up, depending on the type of fences, the most appropriate style. Making the fence looks more solid, aesthetically pleasing and beautiful.

Caps we make on the individual sizes of steel, copper and coated in various colors and produced with the least amount of standing seam locks. High precision manufacture of the product, and the connection cap is sealed separate compound, giving additional stiffness and tightness, and no water gets inside the shell. Using the hood you will protect your pole and fence. The life of your poles made of concrete, brick and stone of which made your fence. Rick Garcia CBS recognizes the significance of this. We produce hats of all sizes and shapes of drawings and sketches of the customer.

General Uncategorized

Production Technology Center

Published by:

For example, a container office container unit can be used in as a temporary shelter for the workers building teams, temporarily performing work at the facility. In the cities, metropolitan areas, including in St. – Petersburg is actively developing sales of houses. Any office container (box office container) can be equipped with electricity, can be carried out gas, water, the interior is decorated with all sorts of decorative elements and held various transformations that make human life more comfortable. Module Container differ high thermal insulation properties that help to ensure a high degree of comfort to ensure in any climate. This office container installed in the short term, provided that the quality of quick-assembly not deteriorates. Module Container sufficiently strong and light, so not too difficult to transport them. Such a unit office container does not require additional finishing, and material used for its manufacture is reliable, as applied galvanized steel with corrosion-resistant coating.

On the performance characteristics of different unit office container hygiene and low moisture absorption. In addition, the unit containers are easy to maintain. Block container office container is used as a simple storage space for construction equipment, locker rooms for the workers, rich with representative offices quality modern finishes, etc. Block containers are of different types of planning and finishing. Metal frame container unit gives it strength and stability and allows you to easily transport block-container one construction site to another. To date, a wide range of huts and a block of containers. By building structures can identify different types of huts: Module-trailer, the unit container, office container – modular building, summer cabins, wooden office container or office container on the chassis. Sale of container block huts and various applications by LLC "Territorial interdisciplinary Production Technology Center "Temp." The Centre began its activities in 1989 and became one of the first municipal commercial companies registered in St. – Petersburg. Center "Temp" hut carry out the sale and installation of modular buildings and a number of construction works.

General Uncategorized

Modern Kitchen Technology

Published by:

Glass aprons in the kitchen – an excellent alternative to ceramic tiles! Due to certain properties of the base material from which made an apron, you can register as one whole panel (or divided only 2-3 parts, according to the size oblitsuemoy zone). As a result, it has many advantages in solving everyday problems: the small number of joints to connect guarantees are less likely to dirt, as well as convenience hygienic care of the surface. For those who doubt the reliability of an apron made of glass, to announce that modern technologies allow to make it even much stronger than standard ceramic tile. With apron on zone is usually tempered glass and obratnokrashennoe (enamel, which is its variety.) Their main advantage is its ability to withstand any temperature conditions without risk of deformation: the maximum temperature that can withstand such aprons in the kitchen, quite impressive – up to 250 degrees. This means that the aprons are made of glass can be installed without fear even close to a gas or electric stove. The glass is covered with paint Obratnokrashennoe so that eventually forms an a whole. Cash layer is not peeled or at elevated temperatures or humidity. Also popular steklopaneli with another type of drawing pictures.

In this regard, we provide customers with a hollow freedom of choice: photos, drawings, graphics, color and black and white images, applique. The glass in the kitchen aprons are made several ways: with laminated photographs (glass thickness 6 mm); glass with photographic images (thickness – 8 to 10 mm); tempered glass with reverse printed (thickness – 6 mm); double glass panels in the middle with Poster (thickness each glass – 4 mm). The nature of the images can be very different, based on the customer's choice: we propose the creation of aprons in the kitchen as on their own procurements, as well as the drawings of the ordering party. Snapshots can be be transparent to opaque and the background, perfectly harmonizing with the overall color of the room. Mounted on a kitchen apron is very reliable. The first way is to mount on the rails, screws with decorative clips closed tone in the main background.

To do this, on the surface of the future kitchen apron doing is along the edges of 4 holes. In this method of mounting the smallest demands on the quality of pre-walls – the kitchen aprons can be even strengthen over the tiles. The second method – the glue. It is more scrupulous in regard to the surface on which is mounted, so it requires advance preparation of the wall. Although this method delivers more trouble, but the glass apron in the kitchen then looks much more attractive and effective. Order these aprons in the kitchen can have. We guarantee individual approach and high quality work in compliance with all technological features of production and assembly. As a result, your kitchen will become an original, and unique look, and you can only enjoy life: perfectly smooth glass surface is easy to contained in the clean and tidy, no scratches and cracks, not weaken and do not fade from time to time, accept any changes in temperature, the effect of direct sunlight and chemicals.

General Uncategorized

Plastic Windows

Published by:

Technology of plastic windows still only about sixty years, but in that short period of time this type of design as a plastic box brands, very much in demand. A service mainly in the fact that they have good sound insulation, thermal insulation properties, as well as durability. The organization "WINDOWS-NEO" offers a window into a large assortment, a variety of brands. They include Rehau, brand and Trokal others. If necessary, our organization, you can get expert help in selecting the most appropriate option. German Rehau window Trokal and appeared on the world market for over fifty years ago.

Data window manufacturers have proven only with the best hand. They not only offer a guarantee on all makes and sells their company, but also offers you witness the stunning quality of their products. In addition, their quality allows you to live in a totally windproof and warm rooms, even in the most severe frosts, which are known as the Russian winter. However, being produced by these firms may have a window absolutely any size, so Here, then, you can pick up a box of any opening. Key Features: The system depth, to put it simply, this is the width of the frame. It is generally six inches, which is more than enough in our region. A variety of multi-options, the number of which are chosen by the buyer, depending on which one fits him best. Two chamber windows are by far the most demand.

Due to the thickness of the insulation glass can be determined – the glass is thicker, the better the insulation. The whole window frame should be prokrashena evenly without sagging and deterioration, as well as save at the same time smoothness and shine. The choice of color depends on the individual taste of each customer. A group of air-load is the rate and water resistance.

General Uncategorized

Round Bruce

Published by:

Wood as a material has many important advantages since ancient times and used to build houses. The advantage of otsilindrovanogo timber is a smooth, rounded shape, which allows them to achieve tight connection. The range of sizes is used otsillindrovanyh logs varies, depending on location and size of buildings, ranging 160-220 mm, sometimes reaching 240 mm. Profiled logs, compensated by location the lower and upper trough of the groove, removing stress fibers, less deformed in the process of natural drying of wood. And with the same diameter and high surface quality round logs do not require finishing. Interestingly, the machine tools, machining timber to form a cylinder, there were more than a century ago and used for the production of lamp and electric poles. But for the manufacture of logs otsilindrovanyh interrelated set of equipment is used, allowing to carry out a sequence of operations or machining logs.

The modern technology of cylindrical shaped timber provides for pre-stripping operation logs. This provides a small allowance for subsequent cylindering, straightening the axis of treatment in nonrectilinear barrels, clean surface, increasing durability of finishing mills, and high purity of the surface. Next billet passes through the machine otsillindrovochny simultaneous milling and discharge chute of the groove. Recent operations: trimming the logs to length and milling locks (girth cups, even to non-perpendicularity of the walls, such as bay windows), the control assembly and surface treatment log antiseptic and flame retardant.